Skip UM navigation Skip to Main Navigation

UNIVERSITY OF MISSISSIPPI SCHOOLS AND COLLEGES


The Schools of Nursing and Pharmacy operate on both the Oxford and Jackson campuses. The Schools of Dentistry, Health Related Professionals and Medicine, and the Health Sciences Graduate School, are based in Jackson only. (Additional healthcare programs are available through the School of Applied Sciences on the Oxford campus.) Other than these exceptions, the schools above are on the Oxford campus.

Emphasis - Materials

B.S.Ch.E. in Chemical Engineering

Description

The B.S. in chemical engineering provides the student with a fundamental knowledge of chemical engineering science and prepares graduates for a variety of careers in industry and government, or for advanced study in engineering, business, or professional school.

Minimum Total Credit Hours: 128

Goals/Mission Statement

Mission Statement

The School of Engineering at the University of Mississippi strives to continuously improve the quality of teaching, research, and service. In so doing, the School

The School capitalizes on its engineering science tradition, its low student to faculty ratio, and the liberal arts environment of the University of Mississippi to give our graduates the abilities to adapt to the rapid changes in engineering and to give our graduates the interdisciplinary background and capacity for innovation that sets them apart from the graduates of larger engineering schools.

Statement of Goals

General Education Requirements

In addition to the courses specified by the School of Engineering general education requirements, the following are required: Math 263-264 and Math 353; laboratory science to be fulfilled by Chem 105, 106, 115, 116 and Phys 211, 212, 221, 222. Students must complete 18 "SHFA" credits defined as follows: 3 hours of fine arts (nonperforming), 12 credits of liberal arts course work, and 3 credits of "additional general education course work" as defined below. The liberal arts course work must include one sequential work in the humanities and one sequential work in the social/behavioral sciences. "Sequential work" is defined as two or more courses from the same department using the acceptable courses in the humanities and social/behavioral sciences as defined in the School of Engineering general education requirements. One sequential work (either humanities or social/behavioral science) must contain a 300 or higher course number. If the student meets the fine arts, humanities, and social/behavioral science work defined above in 15 credits, then the final 3 credits of "additional general education course work" could be from any humanities, social/behavioral science, or the list of nonliberal art courses found in the "3 credits of additional general education course work" located in the School of Engineering general education requirements with the exception that speech and math content courses may not be used to satisfy any of these required 18 "SHFA" credits.

Course Requirements

Specific requirements for the individualized emphasis in chemical engineering are as follows: Chem 221, 222, 225, advanced chemistry (defined below); Csci 251 or Engr 309, 310, 313, 321, 322, 360 or 362; Ch E 103, 104, 307, 308, 317, 345, 411, 417, 421, 423, 445, 446, 451, 452, 511; technical electives to include three 3-hour electives of 300 or higher course number from among engineering, science, or mathematics. Any of the following will satisfy the advanced chemistry requirement: Chem 334, Chem 471, Ch E 545, G E 503, Engr 540, and Manf 350. The following alternative courses may satisfy course requirements as specified:

Emphases in Chemical Engineering: Alternative to the individualized emphasis in chemical engineering (defined above), a student may choose to obtain a B.S. in Chemical Engineering with one or more of the following five emphases: biotechnology, biomedical engineering, environmental, materials, and manufacturing (in collaboration with the Center for Manufacturing Excellence). The same general education and course requirements (defined above) apply to all emphases in chemical engineering. The taking of specific advanced chemistry and elective courses satisfy an emphasis requirement as defined below.

Other Academic Requirements

Students in the Department of Chemical Engineering are encouraged to take the Fundamentals of Engineering examination prior to awarding of the baccalaureate degree.

Emphasis - Materials

Course Requirements

Students in Materials Option must choose ENGR 309 when given the choice in the Foundation/Engineering Science Topic |Materials | | |-----------------------------|:----------| |ENGR 312 | 3 credit Hours | |Ch E 545 | 3 credit Hours | |Materials elective* | 3 credit Hours | |Technical elective | 3 credit Hours| *Materials elective courses: Ch E 543, ME 527, ME 528, ME 530, ME 531, ME 532, ME/EL E 533.

Degree Requirements

The academic regulations for this degree program, as entered in the University of Mississippi Catalog, are in effect for the current or selected academic year and semester. The University of Mississippi reserves the right to 1) change or withdraw courses; 2) change rules for registration, instruction, and graduation; and 3) change other regulations affecting the student body at any time.

B.S.Ch.E. in Chemical Engineering

General Education

Requirement Hours Description
First Year Writing I 3 Complete Hon 101, Writ 100 or Writ 101 with a passing grade.
First Year Writing II 3 Complete Hon 102, Liba 102, or Writ 102 with a passing grade.
Chem 105 3 Complete Chem 105 with a passing grade.
Chem 106 3 Complete Chem 106 with a passing grade.
Chem 115 1 Complete Chem 115 with a passing grade.
Chem 116 1 Complete Chem 116 with a passing grade.
Math 261 3 Complete Math 261 with a passing grade.
Math 262 3 Complete Math 262 with a passing grade.
Math 263 3 Complete Math 263 with a passing grade.
Math 264 3 Complete Math 264 with a passing grade.
Math 353 3 Complete Math 353 with a passing grade.
Phys 211 3 Complete Phys 211 with a passing grade.
Phys 212 3 Complete Phys 212 with a passing grade.
Phys 221 1 Complete Phys 221 with a passing grade.
Phys 222 1 Complete Phys 222 with a passing grade.
3 hrs fine arts 3 Student must successfully complete 3 hours in the fine arts. The course may be chosen from art history, art appreciation, and criticism of art, dance, music, and theatre arts. Courses emphasizing the enhancement of skills and performance are not acceptable.
Serial humanities 6 Complete 6 hrs (from the same department) of humanities choosing from course work in classics, literature, history, philosophy, religion, Southern Studies, African American Studies, and Gender Studies.
Serial social science 6 Complete 6 hours (from the same department) of social sciences choosing from the following; economics, anthropology, political science, psychology, and sociology.Psy 202 and Econ 230 are excluded from these options.
Add'l 300+ level hum/soc sci 12 Complete an additional 3 hours of advanced course work (300 level or above) in the area selected for the humanities or social sciences.

Major Requirements

Requirement Hours Description
Ch E 103/104 or approved course 2 Complete Ch E 103 and Ch E 104. As an alternative, students may complete one one of the following courses: Engr 100, Manf 150 or Manf 252. Coursework must be completed with a passing grade.
Ch E 307 2 Complete Ch E 307 with a passing grade.
Ch E 308 2 Complete Ch E 308 with a passing grade.
Ch E 317 3 Complete Ch E 317 with a passing grade.
Ch E 345 3 Complete Ch E 345 with a passing grade.
Ch E 411 1 Complete Ch E 411 with a passing grade.
Ch E 417 3 Complete Ch E 417 with a passing grade.
Ch E 421 3 Complete Ch E 421 with a passing grade.
Ch E 423 3 Complete Ch E 423 with a passing grade.
Ch E 445 2 Complete Ch E 445 with a passing grade.
Ch E 446 2 Complete Ch E 446 with a passing grade.
Ch E 451 4 Complete Ch E 451 with a passing grade.
Ch E 452 or Ch E 460/461 3 Complete either Ch E 452 or Ch E 460/461 with a passing grade.
Ch E 511 3 Complete Ch E 511 with a passing grade.
Enroll in a BSChE emphasis Enroll in an emphasis in BSChE program.
School of Engineering GPA Must be at least a 2.0

Major Requirements II

Requirement Hours Description
Chem 225 1 Complete Chem 225 with a passing grade.
Chem 222 3 Complete Chem 222 with a passing grade.
Chem 221 3 Complete Chem 221 with a passing grade.
Engr 310 3 Complete Engr 310 with a passing grade.
Engr 313 3 Complete Engr 313 with a passing grade.
Engr 321 3 Complete Engr 321 with a passing grade.
Engr 322 3 Complete Engr 322 with a passing grade.
Engr 309 or Csci 251 3 Complete either Engr 309 or Csci 251 with a passing grade.
Engr 360 3 Complete Engr 360 with a passing grade.

Emphasis - Materials

Requirement Hours Description
Ch E 545 3 Complete Ch E 545 with a passing grade.
Engr 312 3 Complete Engr 312 with a passing grade.
Materials elective 3 Complete at least one materials elective chosen from the following courses: Ch E 543, ME 527, ME 528, ME 530, ME 531, ME 532, ME/EL E 533.
Tech elective or Ch E 330 3 Complete a technical elective or ChE R&D Experience (ChE 330).
The policies and regulations contained in this online University of Mississippi Catalog are in effect for the current or selected semester. The catalog is not a contract, but rather a guide for the convenience of students. The University of Mississippi reserves the right to 1) change or withdraw courses; 2) change the fees, rules, and schedules for admission, registration, instruction, and graduation; and 3) change other regulations affecting the student body at any time. Implicit in each student’s enrollment with the university is an agreement to comply with university rules and regulations, which the university may modify to exercise properly its educational responsibility.